top of page

11- Cord Connect :

 

Make water-tight electrical cord connections

 

The Cord Connect provides a water-tight connection while locking electrical cords together to prevent accidental disconnects.

Useful applications include outdoor lighting, landscaping, de-icers and many other electrical pond or water garden equipment.

Not for submerged use.

 

Directions

-Step 1: Open each half of the Cord Connect. Place power cord inside and close.

-Step 2: Slip water-tight gasket on the male plug and then connect the cords together.

-Step 3: Twist both halves of Cord Connect together until the plugs are securely pushed together.

 

Certified to a watertight rating of IPX1 - IPX5
Dimensions: 2.1 x 5.2 x 5.6 inches
Weight: 4 ounces 
Made by: Farm Innovators
Manufacturer Model Number: CC-2
Made in USA

Lighting and Electronics - Waterproof Connectors :

Underwater Quick Disconnect

Extend Your Outdoor Power Cord Is your power cord too short? Use this watertight splicing kit to connect a cord extension.

-2.3 inches diameter

-11.5 inches long

-can use .032-0.53 OD wire

 

 

Seliger Underwater Junction Box :

 

Seliger 5 pole junction box

Designed for low voltage cable
The 5-Pole cable connector enables up to 5 lights to be connected to a single transformer.
Sealant available for underwater use

 

 

12- Black Silicone  :

 

Atlantic Water Gardens Black RTV silicone sealant is designed to be used to create a watertight seal where a liner is attached to filtration components. Permanently flexible RTV silicone used in conjunction with Atlantic Water Gardens molded inserts, liner retention flanges and stainless steel hardware will help ensures a watertight connections.

  • 100 percent silicone

  • Permanent Flexibility

  • Fish Safe

Fish Safe Silicone :

 

Description

2 Ounce size

  • 100% Silicone

  • Fish Safe

  • 2.8 oz. Squeeze Tube

  • Easy to use

  • No caulking gun needed

10 Ounce size.

  • 100% Silicone

  • Fish Safe

  • 10 oz. Squeeze Tube

  • Easy to use

  • Needs Caulking Gun

13- Safe Foam :

 

Atlantic Black FallsFoam Water Fall Foam : 

 

FallsFoam is a UV protected expanding black waterfall foam.

 

Use Atlantic FallsFoam waterfall foam to hold the rocks in place and seal the spillway rocks along the bottom and sides so water will flow over the rocks on the spillway. This is a 12 oz can.

-Manufacturer: Atlantic Water Gardens

-Manufacturer Model Number: LF1100

Please Note: This item ships only by UPS Ground. Expedited shipping is not available.

 

Great Stuff :

 

THE FISH-FRIENDLY GAP FILLER

This polyurethane-based foam filler, sealant and adhesive:

-Is black in color to blend in with stones and shadows.

-Bonds without mortar.

-Helps direct water over, not under, rocks.

-Creates a water-shedding bond for stone, rock, masonry, concrete and other building materials.

-Safe for ornamental fish and plants.

-Lasts for years in wet conditions.

It's easy to work with because it:

-All-direction dispensing.

-Can be applied to damp and dry surfaces.

-Cures in 8 hours. 1

-Is UL Classified.

170 ± 5°F and 50 ± 5 % RH, 1 inch bead diameter, 6 inch length. Cure rate is dependent on temperature, humidity, and size of foam bead.

14-Fish Feeder / Viewer (2 Foot Diameter)

 

This Fish Feeder / Viewer floats on the water's surface to keep floating food in a concentrated location.
Feeder rings are a section of tubing with connector to form a ring.

 

Feeder/Viewer can also be used to keep floating plants together.

Please click on the title of the product or the photo to visit the main source .. 

Please click on the title of the product or the photo to visit the main source .. 

Please click on the title of the product or the photo to visit the main source .. 

WATERGARDEN  MAINTENANCE 

Introduction ..

Pond Maintenance Routines  

Pond Nitrogen Cycle  

Ponds problems :

Water gardens pond algae problems  

 Pond Aeration  PART ONE  ..  PART TWO  

Foamy water pond  

Cloudy water pond  

Smelly Pond Water

Acidity/Alkalinity and pH levels

Equipment and supplies used in water ponds maintenance :

PART 1         PART 2       PART 3       PART 4         Part 5        Part 6       

WATERGARDEN  MAINTENANCE 

Introduction ..

Pond Maintenance Routines  

Pond Nitrogen Cycle  

Ponds problems :

Water gardens pond algae problems  

 Pond Aeration  PART ONE  ..  PART TWO  

Foamy water pond  

Cloudy water pond  

Smelly Pond Water

Acidity/Alkalinity and pH levels

Equipment and supplies used in water ponds maintenance :

PART 1         PART 2       PART 3       PART 4         Part 5        Part 6       

bottom of page